DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
455
DGS-3710-12C:admin#show stp
Command: show stp
STP Bridge Global Settings
-----------------------------
STP Status : Disabled
STP Version : RSTP
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Disabled
NNI BPDU Address : dot1d
Enabled PortList : 1-12
Forward BPDU Portlist :
DGS-3710-12C:admin#
45-2
show stp instance
Description
This command is used to display each instance parameters settings. Value means the instance ID,
if there is no input of this value, all instances will be shown.
Format
show stp instance {<value 0-15>}
Parameters
<value 0-15>
- (Optional) Specifies the MSTP instance ID. Instance 0 represents the default
instance: CIST. The bridge supports a total 16 Instances (0 to 15) at most.
Restrictions
None.
Example
To display STP instances: