DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
377
36-14
show lldp_med
Description
This command is used to display the switch’s general LLDP-MED configuration status.
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the switch’s general LLDP-MED configuration status:
DGS-3710-12C:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class : Network Connectivity Device
Hardware Revision : A1
Firmware Revision : 1.00.001
Software Revision : 1.00.029
Serial Number :
Manufacturer Name : D-Link
Model Name : DGS-3710-12C Gigabit Ethernet Sw
Asset ID :
LLDP-MED Configuration:
Fast Start Repeat Count : 4
LLDP-MED Log State:Disabled
DGS-3710-12C:admin#
36-15
show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}