DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
622
v3
-
Specifies the most secure of the possible security models. Specifies authentication of a
packet.
noauth_nopriv
-
Specifies to neither support packet authentication nor encrypting.
auth_nopriv
-
Specifies to support packet authentication.
auth_priv
-
Specifies to support packet authentication and encrypting.
read_view
-
Specifies the view name between 1 and 32 characters.
<view_name 32>
- Specifies the view name between 1 and 32 characters.
write_view
- Specifies the view name between 1 and 32 characters.
<view_name 32>
- Specifies the view name between 1 and 32 characters.
notify_view
- Specifies the view name between 1 and 32 characters.
<view_name 32>
- Specifies the view name between 1 and 32 characters.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a new SNMP group:
DGS-3710-12C:admin#create snmp group D-Link_group v3 auth_priv read_view
CommunityView write_view CommunityView notify_view CommunityView
Command: create snmp group D-Link_group v3 auth_priv read_view CommunityView
write_view CommunityView notify_view CommunityView
Success.
DGS-3710-12C:admin#
62-14
delete snmp group
Description
This command is used to remove an SNMP group.
Format
delete snmp group <groupname 32>
Parameters
<groupname 32>
- Specifies the name of the group that will be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example
To remove an SNMP group: