DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
430
42-14
config mld_snooping mrouter_ports
Description
This command allows users to designate a range of ports as being connected to multicast-enabled
routers. This will ensure that all packets with such a router as its destination will reach the
multicast-enabled router, regardless of protocol.
Format
config mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list>] [add |
delete] <portlist>
Parameters
vlan
- Specifies the name of the VLAN on which the router port resides.
<vlan_name 32>
- Specifies the name of the VLAN on which the router port resides. The
maximum length is 32 characters.
vlanid
- Specifies the ID of the VLAN on which the router port resides.
<vlanid_list>
- Specifies a list of VLAN IDs.
add
- Specifies to add router ports.
delete
- Specifies to delete router ports.
<portlist>
- Specifies a range of ports to be configured.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To set up static router ports:
DGS-3710-12C:admin#config mld_snooping mrouter_ports vlan default add 1-10
Command: config mld_snooping mrouter_ports vlan default add 1-10
Success.
DGS-3710-12C:admin#
42-15
config mld_snooping mrouter_ports_forbidden
Description
This command allows you to designate a range of ports as being not connected to multicast-
enabled routers. This ensures that the forbidden router port will not propagate routing packets out.
Format
config mld_snooping mrouter_ports_forbidden [vlan <vlan_name 32> | vlanid <vlanid_list>]
[add | delete] <portlist>