DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
672
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To add 4 through 8 as tagged ports to the VLAN 1:
DGS-3710-12C:admin#config vlan vlanid 1 add tagged 4-8
Command: config vlan vlanid 1 add tagged 4-8
Success.
DGS-3710-12C:admin#
To delete ports 4 through 8 from VLAN 1:
DGS-3710-12C:admin#config vlan vlanid 1 delete 4-8
Command: config vlan vlanid 1 delete 4-8
Success.
DGS-3710-12C:admin#
To enable the VLAN default advertisement:
DGS-3710-12C:admin#config vlan vlanid default advertisement enable
Command: config vlan vlanid default advertisement enable
Success.
DGS-3710-12C:admin#
72-7
config port_vlan
Description
This command is used to set the ingress checking status and the sending and receiving of GVRP
information.
Format
config port_vlan [<portlist> | all] {gvrp_state [enable | disable] | ingress_checking [enable |
disable] | acceptable_frame [tagged_only | admit_all] | pvid <vlanid 1- 4094>} (1)
Parameters
<portlist>
- Specifies a range of ports to be set.
all
- Specifies to make all ports to be set.
gvrp_state
- Specifies if the port is allowed to dynamically become a member of a VLAN when
receiving GVRP.
enable
- Enable GVRP for the ports specified in the port list.
disable
- Disable GVRP for the ports specified in the port list.