![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-406.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
402
Example
To configure a local database entry:
DGS-3710-12C:admin#config mac_based_access_control_local mac 00-00-00-00-00-01
vlan default
Command: config mac_based_access_control_local mac 00-00-00-00-00-01 vlan
default
Success.
DGS-3710-12C:admin#
39-12
config mac_based_access_control max_users
Description
This command is used to configure the MAC-based access control maximum number of
authorized users.
Format
config mac_based_access_control max_users [<value 1-1000> | no_limit]
Parameters
<value 1-1000>
- Specifies the maximum number of authorized users.
no_limit
- Specifies an unlimited number of authorized users.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the MAC-based access control maximum number of authorized users:
DGS-3710-12C:admin#config mac_based_access_control max_users 2
Command: config mac_based_access_control max_users 2
Success.
DGS-3710-12C:admin#
39-13
config mac_based_access_control authorization attributes
Description
This command is used to enable or disable the acceptance of an authorized configuration. When
authorization is enabled for MAC-based access controls with RADIUS authentication, the
authorized attributes (for example VLAN and 802.1p default priority) assigned by the RADUIS
server will be accepted if the global authorization status is enabled. When authorization is enabled
for MAC-based access controls with local authentication, the authorized attributes assigned by the
local database will be accepted.