DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
406
DGS-3710-12C:admin#show mac_based_access_control
Command: show mac_based_access_control
MAC-based Access Control
------------------------------------
State : Disabled
Method : Local
Password : default
Max User : 128
Guest VLAN :
Guest VLAN Member Ports:
RADIUS Authorization : Enabled
Local Authorization : Enabled
Trap State : Enabled
Log State : Enabled
DGS-3710-12C:admin#
To display MAC-based access control information for ports 1 to 4:
DGS-3710-12C:admin#show mac_based_access_control ports 1-4
Command: show mac_based_access_control ports 1-4
Port State Aging Time Block Time Auth Mode Max User
(min) (sec)
----- -------- ---------- --------- ---------- --------
1 Disabled 1440 300 Host_based 128
2 Disabled 1440 300 Host_based 128
3 Disabled 1440 300 Host_based 128
4 Disabled 1440 300 Host_based 128
DGS-3710-12C:admin#
39-17
show mac_based_access_control_local
Description
This command is used to display MAC-based access control local data.
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
mac
- (Optional) Display MAC-based access control local databases by this MAC address.
<macaddr>
- Enter the MAC address here.
vlan
- (Optional) Specifies the VLAN.
<vlan_name 32>
- Specifies the VLAN name up to 32 characters long.
vlanid
- (Optional) Specifies the VLAN ID.
<vlanid 1-4094>
- Specifies the VLAN ID value between 1 and 4094.