DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
359
DGS-3710-12C:admin#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC_Source_Dest
Group ID : 1
Type : LACP
Master Port : 1
Member Port : 1-8
Active Port : 7
Status : Enabled
Flooding Port : 7
Total Entries: 1
DGS-3710-12C:admin#
To display the current link aggregation configuration when link aggregation is disabled:
DGS-3710-12C:admin#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-Source-Dest
Group ID : 1
Type : LACP
Master Port : 1
Member Port : 1-8
Active Port :
Status : Disabled
Flooding Port :
Total Entries: 1
DGS-3710-12C:admin#
35-6
config lacp_port
Description
This command is used to configure per-port LACP mode.
Format
config lacp_port <portlist> {mode [active | passive] | lacp_timeout [short | long]}
Parameters
<portlist>
- Specifies a range of ports to be configured.
mode
– (Optional) Specifies the port mode.
active
- Specifies the mode as active.
passive
- Specifies the mode as passive.
lacp_timeout
- (Optional) Specifies to use the LACP timeout mode.