DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
546
Restrictions
None.
Example
To display 802.1p default priority for ports 1 to 3:
DGS-3710-12C:admin#show 802.1p default_priority 1-3
Command: show 802.1p default_priority 1-3
Port Priority Effective Priority
---- ----------- ------------------
1 0 0
2 0 0
3 0 0
DGS-3710-12C:admin#
53-13
config 802.1p map
Description
This command is used to configure the mapping of 802.1p to a packet’s initial color.
Format
config 802.1p map [<portlist> | all] 1p_color <priority_list> to [green | red | yellow]
Parameters
<portlist>
- Enter the list of ports, used for this configuration, here.
all
- Specifies that all the port will be used for this configuration.
1p_color
- Specifies the source priority of incoming packets.
<priority_list>
- Enter the source priority list value used here.
to
- Specifies that the source priority list will be mapped to a color.
green
- Specifies that the mapped color for these packets will be green.
red
- Specifies that the mapped color for these packets will be red.
yellow
- Specifies that the mapped color for these packets will be yellow.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the mapping of 802.1p to a packet’s initial color: