DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
209
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the DHCP relay function:
DGS-3710-12C:admin#disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3710-12C:admin#
18-18
show dhcp _relay
Description
This command is used to display the current DHCP relay configuration.
Format
show dhcp _relay {ipif <ipif_name 12>}
Parameters
ipif
– (Optional) Specifies the IP interface name.
<ipif_name 12>
- Specifies the IP interface name. The IP interface name can be up to 12
characters long.
Note:
If no parameter is specified, the system will display all DHCP relay
configurations.
Restrictions
None.
Example
To display the DHCP relay status:
DGS-3710-12C:admin#show dhcp_relay
Command: show dhcp_relay
DHCP/Bootp Relay Status : Disabled
DHCP/Bootp Hops Count Limit : 4
DHCP/Bootp Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State : Disabled
DHCP Relay Agent Information Option 82 Check : Disabled