DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
621
DGS-3710-12C:admin#config snmp engineID 1023457890
Command: config snmp engineID 1023457890
Success.
DGS-3710-12C:admin#
62-12
show snmp engineID
Description
This command is used to display the identification of the SNMP engine on the switch.
Format
show snmp engineID
Parameters
None.
Restrictions
None.
Example
To display the identification of an SNMP engine:
DGS-3710-12C:admin#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 1023457890
DGS-3710-12C:admin#
62-13
create snmp group
Description
This command is used to create a new SNMP group.
Format
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
{read_view <view_name 32> | write_view <view_name 32> | notify_view <view_name 32>}(1)
Parameters
<groupname 32>
- Specifies the name of the group.
v1
- Specifies the least secure of the possible security models.
v2c
- Specifies the second least secure of the possible security models.