DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
147
12-19
cfm lock md
Description
This command is used to start/stop cfm management lock. This command will result in the MEP
sends a LCK PDU to client level MEP.
Format
cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index <uint
1-4294967295>] mepid <int 1-8191> remote_mepid <int 1-8191> action [start | stop]
Parameters
md
- Specifies the maintenance domain name.
<string 22>
- Enter the maintenance domain name here. This name can be up to 22
characters long.
md_index
– Specifies the MD index value used.
<uint 1-4294967295>
- Enter the MD index value used here. This value must be between
1 and 4294967295.
ma
- Specifies the maintenance association name.
<string 22>
- Enter the maintenance association name here. This name can be up to 22
characters long.
ma_index
– Specifies the MA index value used.
<uint 1-4294967295>
- Enter the MA index value used here. This value must be between
1 and 4294967295.
mepid
- The MEP ID in the MD which sends LCK frame.
<int 1-8191>
- Enter the MEP ID value here. This value must be between 1 and 8191.
remote_mepid
- The peer MEP is the target of management action.
<int 1-8191>
- Enter the remote MEP ID used here. This value must be between 1 and 8191.
action
- Specifies to start or to stop the management lock function.
start
- Specifies to start the management lock function.
stop
- Specifies to stop the management lock function.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To start management lock:
DGS-3710-12C:admin# cfm lock md op-domain ma op-ma mepid 1 remote_mepid 2
action start
Command: cfm lock md op-domain ma op-ma mepid 1 remote_mepid 2 action start
Success.
DGS-3710-12C:admin#