DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
294
no_limit
- Specifies that the IGMP snooping message limit will be set to no limit. This is the
default setting.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the IGMP snooping message limit:
DGS-3710-12C:admin#config igmp_snooping message_limit ports 12 100
Command: config igmp_snooping message_limit ports 12 100
Success.
DGS-3710-12C:admin#
27-25
show igmp_snooping message_limit
Description
This command is used to display the IGMP snooping message limit.
Format
show igmp_snooping message_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports
- Specifies the list of ports to use for this display.
<portlist>
- Enter the list of ports, used for this display, here.
vlanid
- Specifies the VLAN ID used for this display.
<vlanid_list>
- Enter the VLAN ID list, used for this display, here.
Restrictions
None.
Example
To display the IGMP snooping message limit: