DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
325
Format
disable address_binding dhcp_snoop {[ipv6 | all]}
Parameters
ipv6
– (Optional) Specifies to disable the IPv6 address binding DHCP snoop mode.
all
– Specifies to disable the IPv6 and IPv4 address binding DHCP snoop mode.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the address binding DHCP snooping mode:
DGS-3710-12C:admin#disable address_binding dhcp_snoop
Command: disable address_binding dhcp_snoop
Success.
DGS-3710-12C:admin#
30-15
clear address_binding dhcp_snoop binding_entry ports
Description
This command is used to clear the address binding entries learned for the specified ports.
Format
clear address_binding dhcp_snoop binding_entry ports [<portlist> | all] {[ipv6 | all]}
Parameters
<portlist>
- Specifies the list of ports to clear the DHCP-snoop learned entry.
all
- Specifies to clear the address binding entries learned for all ports.
ipv6
– (Optional) Specifies that the DHCP snoop learned IPv6 entries will be cleared.
all
– Specifies that the DHCP snoop learned IPv6 and IPv4 entries will be cleared.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear the address binding entries for ports 1 to 3: