DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
426
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan
- (Optional) Specifies the name of the VLAN on which the static group resides.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- (Optional) Specifies the ID of the VLAN on which the static group resides.
<vlanid_list>
- Specifies the VLAN ID list.
<ipv6addr>
- (Optional) Specifies the multicast group IPv6 address (for Layer 3 switch).
Restrictions
None.
Example
To display all the MLD snooping static groups:
DGS-3710-12C:admin#show mld_snooping static_group
Command: show mld_snooping static_group
VLAN ID/Name IP Address Static Member Ports
------------- --------------- ---------------------
1/Default FF1E::1 9-10
Total Entries : 1
DGS-3710-12C:admin#
42-11
show mld_snooping statistic counter
Description
This command is used to display the MLD snooping statistics counters for MLD protocol packets
that are transmitted or received by the switch since MLD snooping was enabled.
Format
show mld_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan
- Specifies a VLAN to be displayed.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies a list of VLANs to be displayed.
<vlanid_list>
- Specifies the VLAN ID list.
ports
– Specifies a list of ports to be displayed.
<portlist>
- Specifies a list of ports.