DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
48
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the 802.1X PDU forwarding state on ports 1 to 2:
DGS-3710-12C:admin#config 802.1x fwd_pdu ports 1-2 enable
Command: config 802.1x fwd_pdu ports 1-2 enable
Success.
DGS-3710-12C:admin#
4-10
config 802.1x fwd_pdu system
Description
This command is used to configure the 802.1X PDU forwarding state.
Format
config 802.1x fwd_pdu system [enable | disable]
Parameters
enable
- Enable the 802.1X PDU forwarding state.
disable
- Disable the 802.1X PDU forwarding state.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the 802.1X PDU forwarding state:
DGS-3710-12C:admin#config 802.1x fwd_pdu system enable
Command: config 802.1x fwd_pdu system enable
Success.
DGS-3710-12C:admin#
4-11
config 802.1x auth_parameter ports
Description
This command is used to configure the parameters that control the operation of the authenticator
associated with a port.