DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
3
In the above example, the Switch was assigned an IP address of 10.90.90.1 with a subnet mask of
255.0.0.0. The system message
Success
indicates that the command was executed successfully.
The Switch can now be configured and managed via Telnet, SNMP MIB browser and the CLI or
via the Web-based management agent using the above IP address to connect to the Switch.
There are a number of helpful features included in the CLI. Entering the
?
command will display a
list of all of the top-level commands.
DGS-3710-12C:admin#?
Command: ?
Option Description
------------------------------------------------------------------------------
.. go to parent directory
? Used to display all commands and specific command usage,
descriptions.
cable_diag cable diagnostic
cfm
clear
config
create
debug
delete
disable
download
enable
login Used to log in a user to the switch's console.
logout Used to log out a user from the switch's console.
no Close IP-MAC Binding debug event and DHCP.
ping Used to test the connectivity between network devices.
ping6
reboot Used to restart the switch.
reconfig Used to re-telnet to member.
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All
When entering a command without its required parameters, the CLI will prompt you with a
Next
possible completions:
message.
DGS-3710-12C:admin#config account
Command: config account
Next possible completions:
Option Description
------------------------------------------------------------------------------
<username> The username is between 1 and 15 characters
DGS-3710-12C:admin#
In this case, the command
config account
was entered with the parameter
<username>
. The CLI
will then prompt to enter the
<username>
with the message,
Next possible completions:
. Every