DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
36
3-6
show ipif
Description
This command is used to display IP interface settings.
Format
show ipif {<ipif_name 12>}
Parameters
<ipif_name 12>
- (Optional) The name of the interface.
Restrictions
None.
Example
To display IP interface settings:
DGS-3710-12C:admin#show ipif
Command: show ipif
IP Interface : System
VLAN Name : default
Interface Admin State : Enabled
DHCPv6 Client State : Disabled
Link Status : LinkDown
IPv4 Address : 10.90.90.90/8 (Manual) Primary
IPv4 State : Enabled
IPv6 State : Enabled
IP Interface : mgmt_ipif
Status : Enable
IP Address : 192.168.0.1
Subnet Mask : 255.255.255.0
GateWay : 0.0.0.0
Link Status : LinkDown
Total Entries: 2
DGS-3710-12C:admin#
3-7
config out_band_ipif
Description
This command is used to configure the out of band management port settings.