DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
41
Chapter 4
802.1X Commands
enable 802.1x
disable 802.1x
create 802.1x user
<username 15>
delete 802.1x user
<username 15>
show 802.1x user
config 802.1x auth_protocol
[local | radius_eap]
show 802.1x
{[auth_state | auth_configuration] ports {<portlist>}}
config 802.1x capability ports
[<portlist> | all] [authenticator | none]
config 802.1x fwd_pdu ports
[<portlist> | all] [enable | disable]
config 802.1x fwd_pdu system
[enable | disable]
config 802.1x auth_parameter ports
[<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> |
supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | max_users [<value 1-128> | no_limit] | enable_reauth [enable
| disable]}(1)]
config 802.1x auth_mode
[port_based | mac_based]
config 802.1x authorization attributes radius
[enable | disable]
config 802.1x init
[port_based ports [<portlist> | all] | mac_based [ports] [<portlist> | all]
{mac_address <macaddr>}]
config 802.1x max_users
[<value 1-1536> | no_limit]
config 802.1x reauth
[port_based ports [<portlist> | all] | mac_based [ports] [<portlist> | all]
{mac_address <macaddr>}]
create 802.1x guest_vlan
<vlan_name 32>
delete 802.1x guest_vlan
<vlan_name 32>
config 802.1x guest_vlan ports
[<portlist> | all] state [enable | disable]
show 802.1x guest_vlan
config radius add
<server_index 1-3> [<server_ip> | <ipv6addr>] key <passwd 32> [ default |
{auth_port <udp_port_number 1-65535> | acct_port <udp_port_number 1-65535> | timeout
<int 1-255> | retransmit <int 1-20>}(1)]
config radius delete
<server_index 1-3>
config radius
<server_index 1-3> {ipaddress [<server_ip> | <ipv6addr>] | key <passwd 32> |
auth_port [<udp_port_number 1-65535> | default] | acct_port [<udp_port_number 1-65535> |
default] | timeout [<int 1-255> | default] | retransmit [<int 1-20> | default]}(1)
show radius
show auth_statistics
{ports [<portlist> | all]}
show auth_diagnostics
{ports [<portlist> | all]}
show auth_session_statistics
{ports [<portlist> | all]}
show auth_client
show acct_client
config accounting service
[network | shell | system] state [enable | disable]
show accounting service
4-1
enable 802.1x
Description
This command is used to enable the 802.1X function.
Format
enable 802.1x