DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
190
Restrictions
Only Administrator-level users can issue this command.
Example
To disabled DHCPv6 relay debug function:
DGS-3710-12C:admin# debug dhcpv6_relay state disable
Command: debug dhcpv6_relay state disable
Success.
DGS-3710-12C:admin#
16-21
debug dhcpv6_relay hop_count state
Description
This command is used to enable or disable debug information flag about the hop count.
Format
debug dhcpv6_relay hop_count state [enable | disable]
Parameters
state
- Specifies the hop count debugging state.
enable
- Specifies that the hop count state will be enabled.
disable
- Specifies that the hop count state will be disabled.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable debug information flag about the hop count:
DGS-3710-12C:admin# debug dhcpv6_relay hop_count state enable
Command: debug dhcpv6_relay hop_count state enable
Success.
DGS-3710-12C:admin#
16-22
debug dhcpv6_relay output
Description
Used to set debug message to output to buffer or console.