DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
349
Parameters
ipv4
– (Optional) Specifies to delete an IPv4 multicast profile.
ipv6
– (Optional) Specifies to delete an IPv6 multicast profile.
profile_id
- Specifies the ID of the profile. The range is from 1 to 60.
<value 1-60>
- The profile ID must be between 1 and 60.
all
- All multicast address profiles will be deleted.
profile_name
- Specifies a profile based on the profile name.
<name 1-32>
- The profile name can be up to 32 characters long.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete a multicast profile with a profile ID of 3:
DGS-3710-12C:admin#delete mcast_filter_profile profile_id 3
Command: delete mcast_filter_profile profile_id 3
Success.
DGS-3710-12C:admin#
To delete a multicast profile with a profile named MOD:
DGS-3710-12C:admin#delete mcast_filter_profile profile_name MOD
Command: delete mcast_filter_profile profile_name MOD
Success.
DGS-3710-12C:admin#
34-5
show mcast_filter_profile
Description
This command is used to display defined multicast address profiles. If the IPv4 or IPv6 option is
not specified, IPv4 is implied.
Format
show mcast_filter_profile {[ipv4 | ipv6]} {[profile_id <value 1-60> | profile_name <name 1-
32>]}
Parameters
ipv4
- (Optional) Specifies to display an IPv4 multicast profile.
ipv6
- (Optional) Specifies to display an IPv6 multicast profile.
profile_id
- (Optional) Specifies the ID of the profile. If both profile_id and profile_name are not
specified, all profiles will be displayed.