DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
432
DGS-3710-12C:admin#
42-17
disable mld_snooping
Description
This command is used to disable MLD snooping on the switch. MLD snooping can be disabled
only if IPv6 multicast routing is not being used. Disabling MLD snooping allows all MLD and IPv6
multicast traffic to flood within a given IPv6 interface.
Format
disable mld_snooping
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable MLD snooping on the switch:
DGS-3710-12C:admin#disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3710-12C:admin#
42-18
show mld_snooping
Description
This command is used to display the current MLD snooping configuration on the switch.
Format
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan
- (Optional) Specifies the name of the VLAN for which to view the MLD snooping
configuration.
<vlan_name 32>
- Specifies the name of the VLAN. The maximum length is 32 characters.
vlanid
- (Optional) Specifies the ID of the VLAN for which to view the MLD snooping
configuration.
<vlanid_list>
- Specifies a list of VLAN IDs.