![background image](/i/d-link/144853/d-link-dgs-3710-12c/h/d-link-dgs-3710-12c-142.png)
DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
138
mepid
- Specifies the MEPID.
<int 1-8191>
- Specifies the MEP MEPID between 1 and 8191.
period
- (Optional) Specifies the transmitting interval of the AIS PDU.
1sec
- Specifies that the transmitting interval period will be set to 1 second.
1min
- Specifies that the transmitting interval period will be set to 1 minute.
level
- (Optional) Specifies the client level ID to which the MEP sends AIS PDU. The default
client MD level is the MD level that the most immediate client layer MIPs and MEPs exist on.
<int 0-7>
- Enter the client level ID used here. This value must be between 0 and 7.
state
- (Optional) Specifies the AIS function state used.
enable
- Specifies that AIS function state will be enabled.
disable
- Specifies that AIS function state will be disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the AIS function so that it is enabled and has a client level of 5:
DGS-3710-12C:admin# config cfm ais md op-domain ma op-ma mepid 1 state enable
level 5
Command: config cfm ais md op-domain ma op-ma mepid 1 state enable level 5
Success.
DGS-3710-12C:admin#
12-8
config cfm lock md
Description
This command is used to configure the parameters of the LCK function on a MEP.
Format
config cfm lock md [<string 22> | md_index <uint 1-4294967295>] ma [<string 22> |
ma_index <uint 1-4294967295>] mepid <int 1-8191> {period [1sec | 1min] | level <int 0-7> |
state [enable | disable]}
Parameters
md
- Specifies the maintenance domain name.
<string 22>
- Specifies the maintenance domain name. The maximum length is 22
characters.
md_index
- Specifies the maintenance domain index.
<uint 1-4294967295>
- Enter the maintenance domain index value here. This value must
be between 1 and 4294967295.
ma
- Specifies the maintenance association name.
<string 22>
- Specifies the maintenance association name. The maximum length is 22
characters.
ma_index
- Specifies the maintenance association index.
<uint 1-4294967295>
- Enter the maintenance association index value here. This value
must be between 1 and 4294967295.
mepid
- Specifies the MEPID.