DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
358
Example
To configure the link aggregation algorithm for mac-source-dest:
DGS-3710-12C:admin#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
DGS-3710-12C:admin#
35-5
show link_aggregation
Description
This command is used to display the current link aggregation configuration of the switch.
Format
show link_aggregation {group_id <value 1-6> | algorithm}
Parameters
group_id
- (Optional) Specifies the group ID. The group number identifies each of the groups.
<value 1-6>
- The Switch allows up to 6 link aggregation groups to be configured.
algorithm
- (Optional) Specifies the display of link aggregation by the algorithm in use by that
group.
Note:
If no parameter is specified, the system will display all the link aggregation
information.
Restrictions
None.
Example
To display the current link aggregation configuration when link aggregation is enabled: