DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
552
53-21
show dscp map
Description
This command is used to display the DSCP map configuration parameters.
Format
show dscp map {<portlist>} [dscp_priority | dscp_dscp | dscp_color] {dscp <dscp_list>}
Parameters
<portlist>
- (Optional) Enter a list of port, used for the display, here.
dscp_priority
- Specifies the list of DSCP values to be mapped to a specific priority.
dscp_dscp
- Specifies the list of DSCP values to be mapped to a specific DSCP.
dscp_color
– Specifies the list DSCP value by color.
dscp
- (Optional) Specifies the DSCP value whose mapping state will be displayed.
<dscp_list>
- Specifies the DSCP list here.
Restrictions
None.
Example
To display the DSCP map configuration:
DGS-3710-12C:admin#show dscp map dscp_priority
Command: show dscp map dscp_priority
DSCP to 802.1p Priority Mapping:
Port 1
DSCP 0,2-7 is mapped to 0
DSCP 1,8-15 is mapped to 1
DSCP 16-23 is mapped to 2
DSCP 24-31 is mapped to 3
DSCP 32-39 is mapped to 4
DSCP 40-47 is mapped to 5
DSCP 48-55 is mapped to 6
DSCP 56-63 is mapped to 7
Port 2
DSCP 0-7 is mapped to 0
DSCP 8-15 is mapped to 1
DSCP 16-23 is mapped to 2
DSCP 24-31 is mapped to 3
DSCP 32-39 is mapped to 4
DSCP 40-47 is mapped to 5
DSCP 48-55 is mapped to 6
DSCP 56-63 is mapped to 7
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All