DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
14
2-8
show switch
Description
This command is used to display the switch information.
Format
show switch
Parameters
None.
Restrictions
None.
Example
To display the switch information:
DGS-3710-12C:admin#show switch
Command: show switch
Device Type : DGS-3710-12C Gigabit Ethernet Switch
MAC Address : F0-7D-68-25-CB-40
IP Address : 10.90.90.90 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.00.001
Firmware Version : Build 1.00.029
Hardware Version : A1
Customer ID : World-Wide
System Name :
System Location :
System Uptime : 0 days, 1 hours, 35 minutes, 8 seconds
System Contact :
Spanning Tree : Disabled
GVRP : Disabled
IGMP Snooping : Disabled
MLD Snooping : Disabled
Telnet : Enabled (TCP 23)
Web : Enabled (TCP 80)
SNMP : Disabled
SSL Status : Disabled
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All