DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
50
Example
To configure the parameters that control the operation of the authenticator associated with a port:
DGS-3710-12C:admin# config 802.1x auth_parameter ports 1-2 direction both
Command: config 802.1x auth_parameter ports 1-2 direction both
Success.
DGS-3710-12C:admin#
4-12
config 802.1x auth_mode
Description
This command is used to configure the authentication mode.
Format
config 802.1x auth_mode [port_based | mac_based]
Parameters
port_based
- Used to configure authentication in port-based mode.
mac_based
- Used to configure authentication in MAC-based (host-based) mode.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the authentication mode:
DGS-3710-12C:admin#config 802.1x auth_mode port_based
Command: config 802.1x auth_mode port_based
Success.
DGS-3710-12C:admin#
4-13
config 802.1x authorization attributes radius
Description
This command is used to enable or disable the acceptation of an authorized configuration.
Format
config 802.1x authorization attributes radius [enable | disable]