DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
480
46-19
config snmp warmstart_traps
Description
This command is used to configure the trap state for warmstart events.
Format
config snmp warmstart_traps [enable | disable]
Parameters
enable
- Enable traps for warmstart events. The default state is enabled.
disable
- Disable traps for warmstart events.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable traps for warmstart events:
DGS-3710-12C:admin#config snmp warmstart_traps enable
Command: config snmp warmstart_traps enable
Success.
DGS-3710-12C:admin#
46-20
config rmon trap
Description
This command is used to configure the trap state for RMON events.
Format
config rmon trap {rising_alarm [enable | disable] | falling_alarm [enable | disable]}
Parameters
rising_alarm
- (Optional) Specifies the trap state for rising alarm. The default state is enabled.
enable
- Enable the trap state for rising alarm.
disable
- Disable the trap state for rising alarm.
falling_alarm
- (Optional) Specifies the trap state for falling alarm. The default state is enabled.
enable
- Enable the trap state for falling alarm.
disable
- Disable the trap state for falling alarm.
Restrictions
Only Administrator-level users can issue this command.