DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
502
DGS-3710-12C:admin#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host 1
IP Address : 10.1.1.2
Severity : Warning
Facility : Local10
UDP port : 514
Status : Disabled
Host 2
IP Address : 3000:501:100:ffff:101:202:303:1
Severity : Emergency
Facility : Local10
UDP port : 514
Status : Disabled
Total Entries : 2
DGS-3710-12C:admin#
47-22
show attack_log
Description
This command is used to display the switch’s attack log.
Format
show attack_log {index <value_list>}
Parameters
index
- (Optional) Specifies the list of index of the entries that need to be displayed.
<value_list>
- Specifies the list of index of the entries that need to be displayed. For example,
show attack_log index 1-5 will display the attack log messages from 1 to 5.
Note:
If no parameter is specified, all entries in the attack log will be displayed.
Restrictions
None.
Example
To display the switch’s attack log: