DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
408
Format
config mac_based_access_control log state [enable | disable]
Parameters
state
- Specifies the log state for MAC-based Access Control.
enable
- Specifies that the log for MAC-based Access Control will be enabled.
disable
- Specifies that the log for MAC-based Access Control will be disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the log state for MAC-based Access Control:
DGS-3710-12C:admin# config mac_based_access_control log state disable
Command: config mac_based_access_control log state disable
Success.
DGS-3710-12C:admin#
39-19
config mac_based_access_control trap state
Description
This command is used to enable or disable the sending of MAC-based Access Control traps.
Format
config mac_based_access_control trap state [enable | disable]
Parameters
state
- Specifies the trap state for MAC-based Access Control.
enable
- Specifies that the trap state for MAC-based Access Control will be enabled.
disable
- Specifies that the trap state for MAC-based Access Control will be disabled.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the trap state for MAC-based Access Control: