DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
82
5-20
delete authen server_host
Description
This command is used to delete an authentication server host.
Format
delete authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]
Parameters
<ipaddr>
- Specifies the server host’s IP address.
protocol
- Specifies the server host’s type of authentication protocol.
tacacs
- Specifies the server host’s authentication protocol TACACS.
xtacacs
- Specifies the server host’s authentication protocol XTACACS.
tacacs+
- Specifies the server host’s authentication protocol TACACS+.
radius
- Specifies the server host’s authentication protocol RADIUS.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete an authentication server host:
DGS-3710-12C:admin#delete authen server_host 10.1.1.222 protocol tacacs+
Command: delete authen server_host 10.1.1.222 protocol tacacs+
Success.
DGS-3710-12C:admin#
5-21
show authen server_host
Description
This command is used to display authentication server hosts.
Format
show authen server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.