DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
437
Restrictions
None.
Example
To display all MLD snooping forwarding entries located on the switch:
DGS-3710-12C:admin#show mld_snooping forwarding
Command: show mld_snooping forwarding
VLAN Name : default
Source IP : 2001::1
Multicast Group: FE1E::1
Port Member : 2,7
VLAN Name : default
Source IP : 2001::1
Multicast Group: FE1E::1
Port Member : 5
Total Entries: 2
DGS-3710-12C:admin#
42-22
show mld_snooping host
Description
This command is used to display the MLD snooping host on the switch.
Format
show mld_snooping host {[vlan <vlan_name 32> | vlanid <vlanid_list > | ports <portlist> |
group <ipv6addr>]}
Parameters
vlan
- (Optional) Specifies the VLAN name to display the host information.
<vlan_name 32>
- Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- (Optional) Specifies the VLAN ID to display the host information.
<vlanid_list>
- Specifies the VLAN ID list.
ports
- (Optional) Specifies the list of ports to display the host information.
<portlist>
- Specifies a range of ports to be displayed.
group
- (Optional) Specifies the group’s IPv6 address to display the host information.
<ipv6addr>
- Specifies the IPv6 address.
Restrictions
None.