DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
531
Example
To add a protocol IPv6 to protocol group 4:
DGS-3710-12C:admin# config dot1v_protocol_group group_id 4 add protocol
ethernet_2 86dd
Command: config dot1v_protocol_group group_id 4 add protocol ethernet_2 86dd
Success.
DGS-3710-12C:admin#
To delete a protocol IPv6 from protocol group ID 4:
DGS-3710-12C:admin# config dot1v_protocol_group_group_id 4 delete protocol
ethernet_2 86dd
Command: config dot1v_protocol_group group_id 4 delete protocol ethernet_2 86dd
Success.
DGS-3710-12C:admin#
52-3
delete dot1v_protocol_group
Description
This command is used to delete a protocol group.
Format
delete dot1v_protocol_group [group_id <id> | group_name <name 32> | all]
Parameters
group_id
- Specifies the group ID to be deleted.
<id>
- Specifies the group ID to be deleted.
group_name
- Specifies the name of the protocol group to be deleted.
<name 32>
- Specifies the name of the protocol group to be deleted. The maximum length is
32 characters.
all
- Specifies to delete all protocol groups.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete protocol group ID 4:
DGS-3710-12C:admin# delete dot1v_protocol_group group_id 4
Command: delete dot1v_protocol_group group_id 4
Success.
DGS-3710-12C:admin#