DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
84
Format
config authen parameter attempt <int 1-255>
Parameters
<int 1-255>
- Specifies the amount of attempts for users trying to login or promote the privilege
on Console, Telnet, SSH, or HTTP interface. The default value is 3.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the maximum attempts for users trying to login or promote the privilege to be 9:
DGS-3710-12C:admin#config authen parameter attempt 9
Command: config authen parameter attempt 9
Success.
DGS-3710-12C:admin#
5-24
show authen parameter
Description
This command is used to display the authentication parameters.
Format
show authen parameter
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the authentication parameters: