DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
221
<file_name 64>
- (Optional) Specifies the file name of the boot image.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the boot file:
DGS-3710-12C:admin#config dhcp pool boot_file engineering boot.had
Command: config dhcp pool boot_file engineering boot.had
Success.
DGS-3710-12C:admin#
19-14
config dhcp pool next_server
Description
This command is used by the DHCP client boot process, typically a TFTP server. If next server
information is not specified, it will not be provided to the client. If this command is input twice for
the same pool, the second command will overwrite the first command. It is allowed to specify next
server but not specify the boot file, or specify the boot file but not specify the next server.
Format
config dhcp pool next_server <pool_name 12> {<ipaddr>}
Parameters
<pool_name 12>
- Specifies the DHCP pool name.
<ipaddr>
- (Optional) Specifies the IP address of the next server.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the next server:
DGS-3710-12C:admin#config dhcp pool next_server engineering 192.168.0.1
Command: config dhcp pool next_server engineering 192.168.0.1
Success.
DGS-3710-12C:admin#