DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
45
Format
config 802.1x auth_protocol [local | radius_eap]
Parameters
local
- Specifiy the authentication protocol as local.
radius_eap
- Specifies the authentication protocol as RADIUS EAP.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the 802.1X RADIUS EAP:
DGS-3710-12C:admin#config 802.1x auth_protocol radius_eap
Command: config 802.1x auth_protocol radius_eap
Success.
DGS-3710-12C:admin#
4-7
show 802.1x
Description
This command is used to display the 802.1X state or configurations.
Format
show 802.1x {[auth_state | auth_configuration] ports {<portlist>}}
Parameters
auth_state
- (Optional) Specifies to display the 802.1X authentication state of some or all ports.
auth_configuration
- (Optional) Specifies to display 802.1X configuration of some or all ports.
ports
- (Optional) Specifies a range of ports to be displayed.
<portlist>
- Specifies a range of ports to be displayed.
Restrictions
None.
Example
To display 802.1X information:
DGS-3710-12C:admin#show 802.1x
Command: show 802.1x
802.1X : Disabled