DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
288
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To set the maximum number of groups that can be learned by data driven:
DGS-3710-12C:admin#config igmp_snooping data_driven_learning max_learned_entry
50
Command: config igmp_snooping data_driven_learning max_learned_entry 50
Success.
DGS-3710-12C:admin#
27-18
clear igmp_snooping data_driven_group
Description
This command is used to delete the IGMP snooping group learned by the data driven mechanism.
Format
clear igmp_snooping data_driven_group [all | [vlan_name <vlan_name> | vlanid <vlanid>]
[<ipaddr> | all]]
Parameters
all
- Specifies all VLANs to which IGMP snooping groups will be deleted.
vlan_name
- Specifies the VLAN name.
<vlan_name>
- Specifies the VLAN name.
vlanid
- Specifies the VLAN ID.
<vlanid>
- Specifies a list of the VLAN IDs.
<ipaddr>
- Specifies the group’s IP address learned by data driven.
all
- Delete all IGMP snooping groups of specified VLANs.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete all the groups learned by the data-driven mechanism:
DGS-3710-12C:admin#clear igmp_snooping data_driven_group all
Command: clear igmp_snooping data_driven_group all
Success.
DGS-3710-12C:admin#