DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
459
Format
delete stp instance_id <value 1-15>
Parameters
<value 1-15>
- Specifies the MSTP instance ID. Instance 0 represents the default instance CIST.
The DUT supports 16 instances (0 to 15) at most.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an MSTP instance:
DGS-3710-12C:admin#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
DGS-3710-12C:admin#
45-7
config stp instance_id
Description
There are two different action types to deal with an MST instance. They are listed as follows:
•
add_vlan: To map specified VLAN lists to an existing MST instance.
•
remove_vlan: To delete specified VLAN lists from an existing MST instance.
Format
config stp instance_id <value 1-15> [add_vlan | remove_vlan] <vidlist>
Parameters
<value 1-15>
- Specifies the MSTP instance ID. Instance 0 represents a default instance CIST.
The DUT supports 16 instances (0-15) at most.
add_vlan
- Defined action type to configure an MST instance.
remove_vlan
- Defined action type to configure an MST instance.
<vidlist>
- Specifies the newly added CLI Value Type. It is similar to
<portlist>
type, but the
value range is 1 to 4094.
Restrictions
Only Administrator and Operator-level users can issue this command.