DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
308
DGS-3710-12C:admin#create iproute default 10.48.74.121
Command: create iproute default 10.48.74.121
Success.
DGS-3710-12C:admin#
29-2
delete iproute
Description
This command is used to delete an IP route entry from the switch’s IP routing table.
Format
delete iproute [default | <network_address>] <ipaddr>
Parameters
default
- Delete a default IP route entry.
<network_address>
- The IP address and netmask of the IP interface that is the destination of
the route. Specifies the address and mask information using the traditional format (for
example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
<ipaddr>
- Specifies the IP address for the next hop router.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete a default route from the routing table:
DGS-3710-12C:admin#delete iproute default 10.48.74.121
Command: delete iproute default 10.48.74.121
Success.
DGS-3710-12C:admin#
29-3
show iproute
Description
This command is used to display the switch’s current IP routing table.
Format
show iproute {<network_address> | <ipaddr>} {static}