DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
105
to 7.
ethernet_type
- Specifies the Ethernet type.
<hex 0x0-0xffff>
- Specifies the Ethernet type.
ip
- Specifies an IP access control list rule.
vlan
- Specifies the VLAN name.
<vlan_name 32>
-Specifies the VLAN name. The maximum length is 32 characters.
vlanid
- Specifies the VLAN ID.
<vlanid 1-4094>
- Specifies the VLAN ID between 1 and 4094.
source_ip
- Specifies an IP source address.
<ipaddr>
- Specifies an IP source address.
destination_ip
- Specifies an IP destination address.
<ipaddr>
- Specifies an IP destination address.
dscp
- Specifies the value of DSCP.
<value 0-63>
- Specifies the value of DSCP. The DSCP value ranges from 0 to 63.
icmp
- Specifies the ICMP.
type
- (Optional) Specifies that the rule will apply to the ICMP Type traffic value.
<value 0-255>
- Specifies the value between 0 and 255.
code
- (Optional) Specifies that the rule will apply to the ICMP Code traffic value.
<value 0-255>
- Specifies the value between 0 and 255.
igmp
- Specifies the IGMP.
type
- (Optional) Specifies that the rule will apply to the IGMP Type traffic value.
<value 0-255>
- Specifies the value between 0 and 255.
tcp
- Specifies TCP.
src_port
- (Optional) Specifies that the rule will apply to a range of TCP source ports.
<value 0-65535>
- Specifies the value between 0 and 65535.
dst_port
- (Optional) Specifies that the rule will apply to a range of TCP destination ports.
<value 0-65535>
- Specifies the value between 0 and 65535.
flag
- Specifies the TCP flag field value.
all
– (Optional) Specifies to check all paramenters below.
urg
- (Optional) Specifies Urgent Pointer field significant.
ack
- (Optional) Specifies Acknowledgment field significant.
psh
- (Optional) Specifies Push Function.
rst
- (Optional) Specifies to reset the connection.
syn
- (Optional) Specifies to synchronize sequence numbers.
fin
- (Optional) No more data from sender.
udp
- Specifies UDP.
src_port
- (Optional) Specifies the UDP source port range.
<value 0-65535>
- Specifies the value between 0 and 65535.
dst_port
- (Optional) Specifies the UDP destination port range.
<value 0-65535>
- Specifies the value between 0 and 65535.
protocol_id
- Specifies that the rule will apply to the value of IP protocol ID traffic.
<value 0-255>
- Specifies the value between 0 and 255.
user_define
- (Optional) Specifies that the rule will apply to the IP protocol ID and that the
mask options behind the IP header, which has a length of 4 bytes.
<hex 0x0-0xffffffff>
- Specifies that the rule will apply to the IP protocol ID and that the
mask options behind the IP header , which has a length of 4 bytes.
packet_content
- Specifies the packet content mask.
offset_0-15
- Specifies the value for packet bytes 0-15.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 0-3.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 4-7.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 8-11.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 12-15.
offset_16-31
- Specifies the value for packet bytes 16-31.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 16-19.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 20-23.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 24-27.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 28-31.
offset_32-47
- Specifies the value for packet bytes 32-47
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 32-35.
<hex 0x0-0xffffffff>
- Specifies the value for packet bytes 36-39.