DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
276
Example
To configure the IGMP snooping querier:
DGS-3710-12C:admin#config igmp_snooping querier vlan_name default
query_interval 125 state enable
Command: config igmp_snooping querier vlan_name default query_interval 125
state enable
Success.
DGS-3710-12C:admin#
27-3
config router_ports
Description
This command is used to designate a range of ports as being connected to multicast-enabled
routers. This will ensure that all packets with such a router as its destination will reach the
multicast-enabled router, regardless of protocol.
Format
config router_ports [<vlan_name 32> | vlanid <vlanid_list>] [add | delete] <portlist>
Parameters
<vlan_name 32>
- Specifies the name of the VLAN on which the router port resides.
vlanid
- Specifies the VLAN ID list.
<vlanid_list>
- Specifies the VLAN ID list.
add
- Specifies to add the router ports.
delete
- Specifies to delete the router ports.
<portlist>
- Specifies a range of ports to be configured.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To set up static router ports:
DGS-3710-12C:admin#config router_ports default add 1-10
Command: config router_ports default add 1-10
Success.
DGS-3710-12C:admin#
27-4
config router_ports_forbidden
Description
This command is used to designate a range of ports as being not connected to multicast-enabled
routers. This ensures that the forbidden router port will not propagate routing packets out.