DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
20
Parameters
<tcp_port_number 1-65535>
-
(Optional) Specifies the TCP port number. TCP ports are
numbered between 1 and 65535. The “well-known” TCP port for the Telnet protocol is 23.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable Telnet and configure a port number:
DGS-3710-12C:admin#enable telnet 23
Command: enable telnet 23
Success.
DGS-3710-12C:admin#
2-17
disable telnet
Description
This command is used to disable Telnet.
Format
disable telnet
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable Telnet:
DGS-3710-12C:admin#disable telnet
Command: disable telnet
Success.
DGS-3710-12C:admin#