DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
52
DGS-3710-12C:admin# config 802.1x init port_based ports all
Command: config 802.1x init port_based ports all
Success.
DGS-3710-12C:admin#
4-15
config 802.1x max_users
Description
This command is used to configure the 802.1X maximum number of users of the system.
Format
config 802.1x max_users [<value 1-1536> | no_limit]
Parameters
<value 1-1536>
- Enter the maximum number of users value here. This value must be between 1
and 1536.
no_limit
- Specifies an unlimited number of users.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the 820.1X maximum numbers of the system:
DGS-3710-12C:admin# config 802.1x max_users 2
Command: config 802.1x max_users 2
Success.
DGS-3710-12C:admin#
4-16
config 802.1x reauth
Description
This command is used to reauthenticate the device connected with the port. During the
reauthentication period, the port status remains authorized until failed reauthentication.
Format
config 802.1x reauth [port_based ports [<portlist> | all] | mac_based [ports] [<portlist> | all]
{mac_address <macaddr>}]