DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
310
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create an IPv6 default route:
DGS-3710-12C:admin#create ipv6route default System FEC0::5
Command: create ipv6route default System FEC0::5
Success.
DGS-3710-12C:admin#
29-5
delete ipv6route
Description
This command is used to delete an IPv6 static route from the switch’s IP routing table. If the next
hop is a global address, it is not necessary to indicate the interface name. If the next hop is a link
local address, then the interface name must be specified.
Format
delete ipv6route [[default | <ipv6networkaddr>] [<ipif_name 12> <ipv6addr> | <ipv6addr>] |
all]
Parameters
default
- Specifies the default route.
<ipv6networkaddr>
- Specifies the IPv6 network address.
<ipif_name 12> <ipv6addr>
- Specifies the IP interface name.
<ipv6addr>
- Specifies the next hop address for the IPv6 route
all
- All static created routes will be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an IPv6 static route:
DGS-3710-12C:admin#delete ipv6route default System FEC0::5
Command: delete ipv6route default System FEC0::5
Success.
DGS-3710-12C:admin#