DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
475
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To prevent SNMP traps from being sent from the switch:
DGS-3710-12C:admin#disable snmp traps
Command: disable snmp traps
Success.
DGS-3710-12C:admin#
46-12
enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3710-12C:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3710-12C:admin#
46-13
disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps