DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
279
<vlan_name 32>
- Specifies the name of the VLAN. The maximum length is 32 characters.
vlanid
- (Optional) Specifies the VLAN ID to display the IGMP snooping configuration.
<vlanid_list>
- Specifies a range of VLAN IDs.
Note:
If no parameter is specified, the system will display all current IGMP snooping
configuration.
Restrictions
None.
Example
To show IGMP snooping:
DGS-3710-12C:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Data Driven Learning Max Entries : 128
Querier Edge Port :
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disable
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0 secs
State : Disable
Fast Leave : Disable
Proxy Reporting : Enable
Proxy Reporting Source IP : 10.90.90.90 (System IP address)
Message Limit : No Limitation
Version : 2
Data Driven Learning State : Enable
Data Driven Learning Aged Out : Disable
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3710-12C:admin#
27-8
clear igmp_snooping group
Description
This command is used to clear the current IGMP snooping group information on the Switch.