DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
199
DGS-3710-12C:admin#config dhcp_relay add ipif System 10.43.21.12
Command: config dhcp_relay add ipif System 10.43.21.12
Success.
DGS-3710-12C:admin#
18-3
config dhcp_relay delete ipif
Description
This command is used to delete an IP destination address from the switch’s DHCP relay table.
Format
config dhcp_relay delete ipif <ipif_name 12> <ipaddr>
Parameters
<ipif_name 12>
- Specifies the name of the IP interface which contains the IP address below.
<ipaddr>
- Specifies the DHCP/BOOTP server IP address.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an IP destination address from the switch’s DHCP relay table:
DGS-3710-12C:admin#config dhcp_relay delete ipif System 10.43.21.12
Command: config dhcp_relay delete ipif System 10.43.21.12
Success.
DGS-3710-12C:admin#
18-4
config dhcp_relay option_60 add string
Description
This command is used to configure the option 60 relay rules. Note that different strings can be
specified with the same relay server, and the same string can be specified with multiple relay
servers. The system will relay the packet to all the matching servers.
Format
config dhcp_relay option_60 add string <multiword 255> relay <ipaddr> [exact-match |
partial-match]