DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
712
Appendix B - System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in
the System Log of this Switch.
Category
Log Description
Severity
Note
System
Event description: System started up
Log Message: System started up
Critical
Event description: Configuration saved to flash
Log Message: Configuration saved to flash (Username: <username>,
IP: <ipaddr>)
Parameters description:
username: The user name that save the configuration.
ipaddr: IP address, if user login by console, there will no IP
information for logging.
Informational
Event description: System log saved to flash
Log Message: System log saved to flash(Username: <username>,
IP: <ipaddr>)
Parameters description:
username: The user name that save the configuration.
ipaddr: IP address, if user login by console, there will no IP
information for logging.
Informational
Event description: Configuration and log saved to flash
Log Message: Configuration and log saved to flash (Username:
<username>, IP: <ipaddr>)
Parameters description:
username: The user name that save the configuration.
ipaddr: IP address, if user login by console, there will no IP
information for logging.
Informational
Peripherals
Function
Event description: Left Side Recovered.
Log Message: Left Side Fan <id> recovered
Parameters description:
id: the Fan id.
Critical
Event description: Left Side failed.
Log Message: Left Side Fan <id> failed
Parameters description:
id: the Fan id.
Critical
Event description: Temperature exceeds confidence level.
Log Message: Temperature sensor <sensorID> enters alarm state
(current temperature: <temperature>).
Parameters description:
sensorID: The sensor ID.
temperature: The temperature.
Warning
Event description: Temperature recovers to normal.
Log Message: Temperature sensor <sensorID> recovers to normal
state (current temperature: <temperature>)
Parameters description:
sensorID: The sensor ID.
temperature: The temperature.
Informational
SNMP
Event description: SNMP request received with invalid community
string
Log Message: Safeguard <ipAddress> with invalid community string!
Parameters description:
ipAddress: IP address.
Informational
Interface
Event description: Port link up
Log Message: Port <portNum> link up, <link state>
Parameters description:
portNum: The port number
link state: port link status, for example: 100Mbps FULL duplex
Informational