DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
231
Chapter 20
DHCPv6 Relay
Command List
enable dhcpv6_relay
disable dhcpv6_relay
config dhcpv6_relay hop_count
[add | delete] ipif <ipif_name 12> <ipv6addr>
[<ipif_name 12> | all] state [enable | disable]
20-1
enable dhcpv6_relay
Description
This command is used to enable the DHCPv6 relay function on the Switch.
Format
enable dhcpv6_relay
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the DHCPv6 relay global state to enable:
DGS-3710-12C:admin# enable dhcpv6_relay
Command: enable dhcpv6_relay
Success.
DGS-3710-12C:admin#
20-2
disable dhcpv6_relay
Description
This command is used to disable the DHCPv6 relay function on the Switch.
Format
disable dhcpv6_relay