DGS-3710 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
558
DGS-3710-12C:admin#config qinq ports 1-4 role nni outer_tpid 0x88a8
Command: config qinq ports 1-4 role nni outer_tpid 0x88a8
Success.
DGS-3710-12C:admin#
54-5
config qinq inner_tpid
Description
The command is used to configure the inner TPID of the system. The inner TPID is used to decide
if the ingress packet is c-tagged. Inner tag TPID is per system configurable. This command is used
in the ‘per-system’ TPID configuration.
Format
config qinq inner_tpid <hex 0x1-0xffff>
Parameters
<hex 0x1-0xffff>
- Enter the Inner-TPID of the system used here.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the inner TPID in the system to 0x9100:
DGS-3710-12C:admin# config inner_tpid 0x9100
Command: config inner_tpid 0x9100
Success.
DGS-3710-12C:admin#
54-6
show qinq inner_tpid
Description
This command is used to display the inner TPID of the system.
Format
show qinq inner_tpid
Parameters
None.